A 2 Meter J Pole
 |
 |
| This picture shows that the j pole is taped to a PVC pole. | The PVC mast pipe coupler allows the pole to slip into a fiberglass mast section and keeps the antenna above the mast. |
 |
 |
| This is the choke balun made from rg-8x coax. | This is a detail of the coax connection. This is before I smothered all the connections with black silicone rubber. At the bottom of the quarter wave section the wires are bent and soldered together, but this is concealed by the electrical tape. |
 |
|
| This show where the cut is made for the quarter wave section. The upper piece of wire is discarded. |
Go Back to Steve's General Page
Go Back to the Pituch Family Page